H3 2006

Removal & Installation

Print

  1. Remove the HVAC module assembly.
  2.  
  3. Disconnect the actuator electrical connectors from the recirculation case.
  4.  
  5. Remove the heater core cover screws.

    Click image to see an enlarged view

    Fig. Exploded view of the heater core assembly

  6.  
  7. Remove the heater core cover.
  8.  
  9. Remove the heater core cover pass through seal.
  10.  
  11. Remove the rear floor air outlet duct mounting screw.
  12.  
  13. Remove the rear floor air outlet duct.
  14.  
  15. Remove the air distribution case screws.
  16.  
  17. Remove the air distribution case.
  18.  
  19. Remove the 2 heater core bracket screws.
  20.  
  21. Remove the heater core bracket.
  22.  
  23. Remove the heater core.
  24.  
  25. Installation is the reverse of removal.
  26.  

 
label.common.footer.alt.autozoneLogo