H3 2006

Ignition Switch

Print

Removal & Installation



  1. Disable the Supplemental Inflatable Restraint (SIR) system.
  2.  
  3. Disconnect the battery negative cable.
  4.  
  5. Remove the lower steering column trim cover.
  6.  
  7. Disconnect the ignition and start switch electrical connector.

    Click image to see an enlarged view

    Fig. Disconnect the ignition and start switch electrical connector (1), then remove the bolts (2) and the ignition and start switch (3)

  8.  
  9. Remove the 2 mounting bolts for the ignition and start switch.
  10.  
  11. Remove the ignition and start switch.
  12.  
  13. Installation is the reverse of removal.
  14.  

 
label.common.footer.alt.autozoneLogo