HHR 2006-2008

2.0L L4 VIN X Std 5

Print

Trouble Code: U1096



No Communication With Instrument Panel Cluster

Possible Causes:



IPC Class 2 circuit is open, shorted to ground or to B+
 
IPC ignition power circuit has a high resistance condition
 
IPC main ground circuit(s) has a high resistance condition
 
IPC (module) may have failed and is pulling the circuit low
 

Trouble Code: U1097



No Communication With Driver Information Center

Possible Causes:



DIC Class 2 circuit is open, shorted to ground or to B+
 
DIC ignition power circuit has a high resistance condition
 
DIC main ground circuit(s) has a high resistance condition
 
DIC (module) may have failed and is pulling the circuit low
 

Trouble Code: U1151



No Communication With Vehicle Interface Unit

Possible Causes:



VIU Class 2 circuit is open, shorted to ground or to B+
 
VIU ignition power circuit has a high resistance condition
 
VIU main ground circuit(s) has a high resistance condition
 
VIU (module) may have failed and is pulling the circuit low
 

Trouble Code: U1152



No Communication With HVAC Control Module

Possible Causes:



HVAC Class 2 circuit is open, shorted to ground or to B+
 
HVAC ignition power circuit has a high resistance condition
 
HVAC main ground circuit(s) has a high resistance condition
 
HVAC (module) may have failed and is pulling the circuit low
 

Trouble Code: U1193



Loss of Vehicle Immobilizer Module Communications

Possible Causes:



Test the main power and ground circuits to the VIM module for a loose connection
 
Check the Class 2 serial data circuit to the VIM module
 
VTD module may have failed
 

Trouble Code: U1255



Class 2 Communications Malfunction

Possible Causes:



Class 2 circuit is open, shorted to ground or shorted to power
 
ECM ignition power circuit(s) has a high resistance condition
 
ECM main ground circuit(s) has a high resistance condition
 

Trouble Code: U1300



Class 2 Circuit Short to Ground

Possible Causes:



Class 2 serial data line was in a low state for 3 seconds due to a short to sensor ground or chassis ground
 
One or more modules on the Class 2 line has a short to ground
 

Trouble Code: U1301



Class 2 Circuit Short to Battery

Possible Causes:



Class 2 serial data line was in a high state for 3 seconds due to a short to VREF or system power
 
One or more modules on Class 2 line has an short to power
 

Trouble Code: U1305



Class 2 Data Link High or Low

Possible Causes:



Class 2 serial data line has either a high or low voltage condition on the circuit, and the module cannot identify the fault
 
One or more modules on Class 2 line has an short to power
 
One or more modules on the Class 2 line has a short to ground
 

Trouble Code: U2100



Controller Area Network (CAN) Bus Communication

Possible Causes:



Control modules the vehicle is equipped with
 
Control module locations on the low speed GMLAN serial data circuit
 
Each control module's low speed GMLAN serial data circuit terminals
 
Control modules the vehicle is equipped with
 
High speed GMLAN serial data circuit terminating resistors
 
Control module locations on the high speed GMLAN serial data circuits
 
Each control module's high speed GMLAN serial data circuit terminals
 

 
label.common.footer.alt.autozoneLogo