HHR 2006-2008

Wheel Bearings

Print

Adjustment



All models use sealed wheel bearings that are pre-adjusted. If the bearing needs replacing, replace the front wheel hub/bearing assembly.

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Raise and support the vehicle.
  4.  
  5. Remove the wheel.
  6.  
  7. Remove the rotor.
  8.  
  9. Remove the axle shaft nut.
  10.  
  11. Remove the wheel speed sensor connector.
  12.  
  13. Remove the wheel bearing bearing/hub assembly bolt.
  14.  
  15. Remove the wheel bearing/hub assembly bearing.
  16.  
  17. Remove the wheel bearing/hub assembly spacer.
  18.  
  19. Installation is the reverse of removal. Torque the axle shaft nut to 81 ft. lbs. (110 Nm); the hub bolts to 85 ft. lbs. (115 Nm).

    Click image to see an enlarged view

    Fig. Front hub/bearing removal

  20.  

 
label.common.footer.alt.autozoneLogo