Honda Accord/Civic/Prelude 1973-1983 Repair Guide
REMOVAL & INSTALLATION
Raise the vehicle and support on jackstands.
Remove the U-bolt assembly and the rubber insulators from the hanger brackets and remove the muffler assembly. Slide the muffler assembly toward the rear of the car to disconnect it from the converter.
Replace parts as needed.
Position the muffler assembly under the car and slide it forward onto the converter outlet pipe. Check that the slot in the muffler and the tab on the converter are fully engaged.
Install the rubber insulators on the hanger assemblies. Install the U-bolt and tighten
Check the system for leaks. Lower the vehicle.