Honda Accord/Civic/Prelude 1973-1983 Repair Guide

Dual Proportioning Valve

Print

REMOVAL & INSTALLATION



See Figure 1

The brake proportioning valve is located in the engine compartment, bolted to the firewall or inner fender well on the passenger side (most vehicles). The valve is not to be repaired, replace it as an assembly.



Click image to see an enlarged view

Fig. Fig. 1: Master cylinder, brake booster and dual proportioning valve mounting

  1. Locate the valve and disconnect the brake fluid lines. Plug all lines.
  2.  
  3. Remove the mounting bolts and remove the valve.
  4.  
  5. To install, reverse the removal procedures. Bleed the brake system.
  6.  

 
label.common.footer.alt.autozoneLogo