Honda Accord/Civic/Prelude 1973-1983 Repair Guide

Headlights

Print

REMOVAL & INSTALLATION



See Figure 1

  1. If equipped with retractable headlights, turn the retractor switch ON . If equipped with a garnish panel, remove it by removing the screws and slide it upward. Remove the retaining ring screws and the ring. DO NOT touch the headlight adjustment screws.
  2.  



Click image to see an enlarged view

Fig. Fig. 1: Headlight replacement

  1. While holding the connector plug by the rear of the bulb, pull the headlight out of the housing; it may be necessary to work the bulb back and forth a few times to break it loose from the connector.
  2.  
  3. Insert the replacement bulb into the connector, then, install the retaining ring and screws.
  4.  

 
label.common.footer.alt.autozoneLogo