Honda Accord/Prelude 1984-1995 Repair Guide

Freeze Plugs

Print

REMOVAL & INSTALLATION



See Figures 1 and 2

The freeze plugs can be loosened and removed using a punch and a hammer. Or, drill a small hole in the middle of the freeze plug, then thread a large sheet metal screw into the hole. Remove the plug with a slide hammer. When installing, coat the freeze plugs with sealer. Tap into position using a piece of pipe, slightly smaller than the plug, as a driver.



Click image to see an enlarged view

Fig. Fig. 1: The freeze plug can be loosened in the block with a punch and hammer



Click image to see an enlarged view

Fig. Fig. 2: Once the freeze plug has been loosened, it can be removed from the block

 
label.common.footer.alt.autozoneLogo