Honda Accord/Prelude 1984-1995 Repair Guide

Throttle Position/Angle Sensor

Print

REMOVAL & INSTALLATION



See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: The throttle body is attached to the intake manifold inlet. Always use a new gasket anytime the throttle body is removed-1990-93 Accord shown (others are similar)

The throttle position sensor is mounted on the side of the throttle body and is connected to the throttle shaft.

  1. Disconnect the negative battery cable.
  2.  
  3. If necessary, remove the throttle body for access.
  4.  
  5. The sensor may be removed by unscrewing the retaining bolts.
  6.  
  7. Reinstall in the reverse order of removal. Make certain the sensor is correctly mated with the throttle body shaft.
  8.  

 
label.common.footer.alt.autozoneLogo