Honda - Accord Prelude 1996 2000

Radio Receiver/Amplifier/Tape Player/CD Player

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Remove all switches that may inhibit removal of the radio



Click image to see an enlarged view

Fig. Pull the radio partially out from the dashboard for access to the connectors



Click image to see an enlarged view

Fig. Unplug the antenna cable. Never allow the radio to hang from the antenna cable, as this may damage the cable



Click image to see an enlarged view

Fig. Detach the wiring harness from the rear of the radio

  1. Note the radio security code, then disconnect the negative battery cable..
  2.  
  3. Remove the center console. For specific details, refer to Fuel System .
  4.  
  5. Detach the cup holder (if applicable). For specific details, refer to Fuel System .
  6.  
  7. Remove the mounting bolts/screws from the console.
  8.  
  9. Remove the mounting screws from the radio and then pull the unit out slightly for access to the connectors on the rear of the radio.
  10.  
  11. Detach the electrical connectors and antenna lead, then remove the radio from the vehicle.
  12.  
  13. Installation is the reverse of the removal procedure. Once installed, enter the security code.
  14.  

 
label.common.footer.alt.autozoneLogo