REMOVAL & INSTALLATION
Fig. Remove the speaker cover by carefully prying it off
Fig. Detach all speaker wire looms by unfastening the retaining screws
Fig. Use a ratchet and socket to remove the speaker mounting screws
Fig. Note the spacer on the end of the speaker mounting screw
Fig. Carefully lift the speaker up . . .
Fig. . . . then detach the wiring harness and remove the speaker
If necessary, remove the door panel, as outlined in
Locate the small rectangular opening at the bottom of the speaker grilles.
Using a suitable, small flat blade prytool, carefully pry the speaker grille up.
Remove the Phillips screws that mount the speaker.
Carefully remove the speaker from the door panel, instrument panel or rear deck to gain access to the electrical connector.
Remove the wire connector from the speaker, then remove the speaker from the vehicle.
Installation is the reverse of the removal procedure.