Honda - Accord Prelude 1996 2000

Control Panel

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. You must remove the center trim panel for access to the control panel retainers

  1. Remove the center trim panel, by unfastening any necessary retainers, then carefully prying it off.
  2.  
  3. Detach the air mix control cable from the heater unit.
  4.  
  5. Remove the panel retaining screws then pull the heater control panel from the dash.
  6.  
  7. Detach the wiring connectors from the back of the control panel, then remove the heater control panel.
  8.  
  9. Installation is the reverse of removal.
  10.  

 
label.common.footer.alt.autozoneLogo