Honda - Accord Prelude 1996 2000

Sway Bar

Print

REMOVAL & INSTALLATION



  1. Raise and safely support the vehicle.
  2.  
  3. Matchmark the sway bar for proper reinstallation.
  4.  
  5. Disconnect the sway bar links from the end of the sway bar.
  6.  
  7. Remove the sway bar bushing brackets from the vehicle's underbody.
  8.  
  9. Remove the sway bar.
  10.  

To install:

  1. Installation is the reverse of removal, noting the following steps:
  2.  
  3. Tighten the sway bar retainers, as follows:

    Sway bar bracket-to-body bolts: 16 ft. lbs. (22 Nm)
     
    Sway bar end link nut and bolt: 13 ft. lbs. (18 Nm) for Prelude, 14 ft. lbs. (19 Nm) for 1996-97 Accord and 43 ft. lbs. (59 Nm) for 1998-00 Accord.
     

  4.  

 
label.common.footer.alt.autozoneLogo