This section describes the operating principles of sending units, warning lights and gauges. Sensors that provide information to the Electronic Control Module (ECM) are covered in Section 4 of this guide.
Instrument panels contain a number of indicating devices (gauges and warning lights). These devices are composed of two separate components. One is the sending unit, mounted on the engine or other remote part of the vehicle, and the other is the actual gauge or light in the instrument panel.
Several types of sending units exist, however most can be characterized as being either a pressure type or a resistance type. Pressure type sending units convert liquid pressure into an electrical signal that is sent to the gauge or warning light. Resistance type sending units are most often used to measure temperature and use variable resistance to control the current flow back to the indicating device. Both types of sending units are connected in series to the gauge or warning light by a wire. When the ignition is turned ON , current flows from the battery to the gauge or warning light and on to the sending unit.