Honda - Accord Prelude 1996 2000

Windshield Washer Pump

Print

REMOVAL & INSTALLATION



The front and rear windshield washer pumps are attached to the washer bottle.

Some later models of the Accord and Prelude may require the removal of the front bumper to gain access to the washer solvent container. All others will require the removal of the front inner fender well.

  1. Remove the front bumper or inner fender well as necessary for access to the windshield washer pump.
  2.  



Click image to see an enlarged view

Fig. You may have to remove the inner fender well to get the windshield washer pump



Click image to see an enlarged view

Fig. The windshield washer pump is mounted to the washer fluid reservoir

  1. Disconnect the washer motor electrical connector and fluid hose.
  2.  
  3. Release the washer pump from the washer bottle and grommet.
  4.  

Installation is the reverse of the removal procedure.

 
label.common.footer.alt.autozoneLogo