Honda Cars 2007-2008

Removal & Installation

Print

  1. Remove the driver's dashboard lower cover and the driver's dashboard under cover.
  2.  
  3. Disconnect the wiring harness from the air mix control motor. Remove wire harness clip, the self-tapping screws and the air mix control motor from the heater unit.
  4.  

To install:

  1. Install the motor in the reverse order of removal. Make sure the pin on the motor is properly engaged with the linkage. After installation, make sure the motor runs smoothly.
  2.  

2.4L Engine Models



Specific to:

Honda Accord 2007-2008

  1. Disconnect the wiring harness from the air mix control motor. Remove the self-tapping screws and the air mix control motor from the heater unit.
  2.  

To install:

  1. Install the motor in the reverse order of removal. Make sure the pin on the motor is properly engaged with the linkage. After installation, make sure the motor runs smoothly.
  2.  

Except 2007 2.4L Engine Models



Specific to:

Honda Accord 2007-2008

  1. Remove the driver's dashboard lower cover and the driver's dashboard under cover.
  2.  
  3. Disconnect the wiring harness from the air mix control motor. Remove wire harness clip, the self-tapping screws and the air mix control motor from the heater unit.
  4.  

To install:

  1. Install the motor in the reverse order of removal. Make sure the pin on the motor is properly engaged with the linkage. After installation, make sure the motor runs smoothly.
  2.  

 
label.common.footer.alt.autozoneLogo