Honda Cars 2007-2008

Master Cylinder

Print

Removal & Installation



Specific to:

Honda Accord 2007

  1. Remove the brake fluid from the clutch master cylinder reservoir with a syringe.
  2.  
  3. Make sure you have the anti-theft codes for the audio unit and the navigation system, and then write down the audio presets.
  4.  
  5. Disconnect the negative cable from the battery, and then disconnect the positive cable.
  6.  
  7. Remove the battery.
  8.  
  9. Remove the air intake assembly.
  10.  
  11. Remove the battery base.
  12.  
  13. Pry out the lock pin, and pull the pedal pin out of the yoke.
  14.  
  15. Remove the master cylinder mounting nuts.
  16.  
  17. Remove the reservoir mounting bolt.
  18.  
  19. Remove the clutch line bracket.
  20.  
  21. Remove the clutch line clips.
  22.  
  23. Remove the clutch master cylinder.

    Click image to see an enlarged view

    Fig. Exploded view of the clutch master cylinder-2007 Accord Models

  24.  

To install:

  1. Installation is the reverse order of removal.
  2.  

Specific to:

Honda Accord 2008

  1. Remove and discard the brake fluid from the clutch master cylinder reservoir with a syringe or other suitable device.
  2.  
  3. Remove the driver's dashboard undercover.
  4.  
  5. Pry out the lock pin, and pull the clevis pin out of the clevis. Remove the master cylinder mounting nuts.
  6.  
  7. Remove the reservoir mounting bolt and the retaining clip then disconnect the clutch line from the clutch master cylinder, and remove the O-ring. Plug or wrap the end of the clutch line with a clean shop towel to prevent brake fluid from coming out.

    Click image to see an enlarged view

    Fig. Exploded view of the clutch master cylinder-2008 Accord Models

  8.  
  9. Remove the master cylinder and the master cylinder seal.