Honda Cars 2007-2008

Output Shaft Speed Sensor

Print

Operation



Specific to:

Honda Fit 2007-2008

The Output Shaft Speed (OSS) sensor detects countershaft speed.

Removal & Installation



Specific to:

Honda Fit 2007-2008

  1. Remove the air cleaner assembly.
  2.  
  3. Disconnect the output shaft (countershaft) speed sensor connector.
  4.  
  5. Remove the output shaft (countershaft) speed sensor.

    Click image to see an enlarged view

    Fig. Removing/installing the OSS sensor connector (A), sensor (B) and O-ring (C)

  6.  

To install:

  1. Install the new O-ring on the new output shaft (countershaft) speed sensor, then install the output shaft (countershaft) speed sensor in the transmission housing. Tighten the sensor to 9 ft. lbs. (12 Nm).
  2.  
  3. Check the connector for rust, dirt, or oil, then connect the connector securely.
  4.  
  5. Install the air cleaner assembly
  6.  

Testing



Specific to:

Honda Fit 2007-2008


NOTE
See applicable tests for specific DTCs in -DIAGNOSIS and TESTING- section.

 
label.common.footer.alt.autozoneLogo