Honda Cars 2007-2008

Adjustment

Print

Air Mix Control Cable



Specific to:

Honda Fit 2007-2008

  1. From under the dash, open the clamp, then disconnect the air mix control cable from the air mix control linkage.
  2.  
  3. Set the temperature control dial to Max Cool.
  4.  
  5. Turn the air mix control linkage fully counterclockwise as shown above, and hold it. Attach the air mix control cable to the air mix control linkage, then install the air mix control cable housing into the clamp.

    Click image to see an enlarged view

    Fig. From under the dash, open the clamp (A), then disconnect the air mix control cable (B) from the air mix control linkage (C)

  6.  

Mode Control Cable



Specific to:

Honda Fit 2007-2008

  1. From under the dash, disconnect the mode control cable housing from the clamp, and disconnect the mode control cable from the mode control linkage.
  2.  
  3. Set the mode control dial to Vent.
  4.  
  5. Turn the mode control linkage fully counterclockwise as shown above, and hold it. Attach the mode control cable to the mode control linkage, then snap the mode control cable housing into the clamp.

    Click image to see an enlarged view

    Fig. From under the dash, disconnect the mode control cable housing from the clamp (A), and disconnect the mode control cable (B) from the mode control linkage (C)

  6.  

Recirculation Control Cable



Specific to:

Honda Fit 2007-2008

  1. From under the dash, disconnect the recirculation control cable housing from the clamp, and disconnect the recirculation control cable from the recirculation control linkage.
  2.  
  3. Set the recirculation control lever to Recirculate.
  4.  
  5. Turn the recirculation control linkage fully clockwise as shown above, and hold it. Attach the recirculation control cable to the recirculation control linkage, then snap the recirculation control cable housing into the clamp.

    Click image to see an enlarged view

    Fig. From under the dash, disconnect the recirculation control cable housing from the clamp (A), and disconnect the recirculation control cable (B) from the recirculation control linkage (C).

  6.  

 
label.common.footer.alt.autozoneLogo