Honda Cars 2007-2008

Ignition Coil Pack

Imprimir

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the ignition coil cover (A).
  4.  
  5. Disconnect the ignition coil connectors, and then remove the ignition coils (B).

    Click image to see an enlarged view

    Fig. Remove the ignition coil cover (A), detach the connectors, then remove the ignition coils (B)

  6.  

To install:

  1. Installation of the ignition coils is the reverse of the removal procedure.
  2.  

2.4L Engine

Specific to:

Honda Accord 2007-2008

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the ignition coil cover, disconnect the ignition coil connectors, and then remove the ignition coils.

    Click image to see an enlarged view

    Fig. Remove the ignition coil cover (A), disconnect the ignition coil connectors (B), then remove the ignition coils (C)

  4.  

To install:

  1. Install the ignition coils in the reverse order of removal.
  2.  

3.0L & 3.5L Engines

Specific to:

Honda Accord 2007-2008

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the engine cover.
  4.  
  5. Disconnect the ignition coil connectors, and then remove the front bank ignition coils.

    Click image to see an enlarged view

    Fig. Disconnect the ignition coil connectors (A), then remove the front bank ignition coils (B)