Honda Cars 2007-2008

Ignition Coil

Print

Removal & Installation



  1. Remove the Manifold Absolute Pressure (MAP) sensor connector, then remove the harness holder from the brackets.

    Click image to see an enlarged view

    Fig. Remove the MAP sensor connector (A), then remove the harness holder (B) from the brackets

  2.  
  3. Disconnect the ignition coil connector, then remove the ignition coils.
  4.  

To install:

  1. Install the ignition coils in the reverse order of removal.
  2.  

 
label.common.footer.alt.autozoneLogo