Honda Cars 2007-2008

Fuel Pressure Regulator

Print

Removal & Installation



Specific to:

Honda Accord 2007-2008

  1. Remove the fuel pump assembly from the fuel tank. For additional information, refer to the following section, --Fuel Pump, Removal and Installation.-
  2.  
  3. Remove the holder and fuel pump regulator.

    Click image to see an enlarged view

    Fig. Remove the housing (A) to access the fuel pressure regulator (B) and O-ring (C)-2007 Accord Models shown

  4.  

To install:

  1. Installation is the reverse order of removal. Coat the O-ring with clean engine oil.
  2.  

Specific to:

Honda Civic 2007-2008

  1. Remove the fuel pump assembly from the fuel tank. . For additional information, refer to the following section, --Fuel Pump, Removal and Installation.-
  2.  
  3. Remove the bracket, ground and fuel pressure regulator.

    Click image to see an enlarged view

    Fig. Remove the bracket (A), ground ring (B) to access the fuel pressure regulator (C) and O-rings (D)-Civic models

  4.  

To install:

  1. Installation is the reverse order of removal. Coat the O-rings with clean engine oil.
  2.  

Specific to:

Honda S2000 2007-2008

  1. Remove the fuel pump assembly from the fuel tank. For additional information, refer to the following section, --Fuel Pump, Removal and Installation.-
  2.  
  3. Remove the clips, holder and remove the fuel pressure regulator.

    Click image to see an enlarged view

    Fig. Remove the clips (A) and holder (B) to access the fuel pressure regulator (C) and O-ring (D)-S2000 Models

  4.  

To install:

  1. Installation is the reverse order of removal. Coat the O-rings with clean engine oil. Replace the clips.
  2.  

 
label.common.footer.alt.autozoneLogo