Honda Cars 2007-2008

Consoles

Print

Removal & Installation



Center Console
  1. Remove the parking brake cover lid.
  2.  
  3. On M/T models, remove the shift knob by unscrewing it.
  4.  
  5. Remove the center console (A) by removing the screws (B), and clips (C).
  6.  
  7. Lift the rear of the console up to detach the clip (D), and pull the console rearward to release the front hook (E) from the heater unit.
  8.  
  9. Disconnect the accessory socket connector (F), and if equipped, auxiliary jack connector (G).
  10.  

To install:

  1. Install the console in the reverse order of removal, and note these items:
    1. Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
    2.  
    3. Make sure the wire harness is not pinched.
    4.  
    5. Make sure each connector is plugged in properly.
    6.  
    7. Set the rib (H) under the pocket onto the parking brake lever bracket (I) correctly.

      Click image to see an enlarged view

      Fig. Removing the center console

    8.  

  2.  

 
label.common.footer.alt.autozoneLogo