Honda Cars 2007-2008

Charging the System

Print

Specific to:

Honda Accord 2007-2008

Honda Civic 2007-2008

Honda S2000 2007-2008


CAUTION
Refer to the applicable precautions for this system before performing the following operation. Failure to follow the warnings and cautions could result in possible personal injury or death.


CAUTION
Air conditioning refrigerant or lubricant vapor can irritate your eyes, nose, or throat. Be careful when connecting service equipment. Do not breathe refrigerant or vapor.

Use only service equipment that is U.L.-listed and is certified to meet the requirements of SAE J2210 to remove HFC-134a (R-134a) from the air conditioning system.


CAUTION
If accidental system discharge occurs, ventilate work area before resuming service.


NOTE
Additional health and safety information may be obtained from the refrigerant and lubricant manufacturers.

  1. Connect a R-134a refrigerant recovery/recycling/charging station (A) to the high-pressure service port (B) and the low-pressure service port (C), as shown, following the equipment manufacturer's instructions.

    Click image to see an enlarged view

    Fig. Connect a R-134a refrigerant recovery/recycling/charging station (A) to the high-pressure service port (B) and the low-pressure service port (C), as shown, following the equipment manufacturer's instructions

  2.  
  3. Evacuate the system, as outlined in this section.
  4.  
  5. Add the same amount of new refrigerant oil to the system that was removed during recovery. Use only KEIHIN SP-10 refrigerant oil.
  6.  
  7. Charge the system with the specified amount of R-134a refrigerant. Do not overcharge the system; the compressor will be damaged.
  8.  
  9. Select the appropriate units of measure for your refrigerant charging station.
  10.  
  11. Check for refrigerant leaks, as outlined in this section.
  12.  

 
label.common.footer.alt.autozoneLogo