Honda Accord 2007-2008
Honda Civic 2007-2008
Honda S2000 2007-2008
Use only service equipment that is U.L.-listed and is certified to meet the requirements of SAE J2210 to remove HFC-134a (R-134a) from the air conditioning system.
Additional health and safety information may be obtained from the refrigerant and lubricant manufacturers.
Connect a R-134a refrigerant recovery/recycling/charging station (A) to the high-pressure service port (B) and the low-pressure service port (C), as shown, following the equipment manufacturer's instructions.
- Open high pressure valve to charge the system to the specified capacity, then close the supply valve, and disconnect the charging station fittings.
- Select the appropriate units of measure for your refrigerant charging station.
Refrigerant capacity for Civic:
- 400-450 g
- 0.9-1.0 lbs.
- 14.1-15.9 oz.
Refrigerant capacity for S2000:
- 550-650 g
- 1.2-1.3 lbs.
- 19.4-21.2 oz.
- Check the system for leaks using a R-134a refrigerant leak detector with an accuracy of 14 g (0.5 oz) per year or better.
- If you find leaks that require the system to be opened (to repair or replace hoses, fittings, etc.), recover the system.
- After checking and repairing leaks, the system must be evacuated.