Honda Cars 2007-2008

Windshield Washer Systems

Print

Removal & Installation



Specific to:

Honda Accord 2007

  1. Remove the right inner fender.
  2.  
  3. Disconnect the washer tube and washer motor 2P connector.
  4.  
  5. Remove the clip and three bolts and the washer reservoir.
  6.  

To install:

  1. Installation is the reverse order of removal.
  2.  

Specific to:

Honda Accord 2008

  1. Remove the right front inner fender.
  2.  
  3. Remove the washer nozzles and clips, and then remove the tubes.
  4.  

To install:

  1. Installation is the reverse order of removal. Take care not to pinch the washer tubes. Check the washer operation.
  2.  

Specific to:

Honda Civic 2007-2008

  1. Remove the right inner fender.
  2.  
  3. Disconnect the washer motor and fluid level switch wiring harness.
  4.  
  5. Disconnect the washer tube.
  6.  
  7. Remove the mounting bolts and remove the washer reservoir.
  8.  

To install:

  1. Installation is the reverse order of removal.

    Click image to see an enlarged view

    Fig. Disconnect the wiring harness (A) and washer tube (C) to remove the washer motor (B)-Civic Models

  2.  

Specific to:

Honda S2000 2007-2008

  1. Pull away the right inner fender.
  2.  
  3. Disconnect the washer tube and the washer motor 2P connector.
  4.  
  5. Remove the bolts, and then separate and remove the filler neck from the washer reservoir.
  6.  
  7. Remove the washer reservoir.
  8.  

To install:

  1. Installation is the reverse order of removal.
  2.  

Washer Motor
  1. Remove the right inner fender.
  2.  
  3. Disconnect the 2-pin connectors and tubes from the washer motors.
  4.  
  5. Remove the washer motors from the washer reservoir.

    Click image to see an enlarged view

    Fig. Disconnect the 2-pin connectors (A) and tubes (B) from the washer motors (C) and remove the washer motors from the washer reservoir (D)

  6.  
  7. Remove the two bolts and clip, then remove the washer reservoir.

    Click image to see an enlarged view

    Fig. Remove the two bolts and clip (A), then remove the washer reservoir (B)

  8.  

To install:

  1. Install the reservoir in the reverse order of removal.
  2.  
  3. Check the washer motor operation.
  4.  

 
label.common.footer.alt.autozoneLogo