Honda Civic/CRX/del Sol 1984-1995 Repair Guide

Control Unit

Print

REMOVAL & INSTALLATION



See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: ALB/ABS control unit, connectors and mounting location in the trunk

  1. Disconnect the negative battery cable.
  2.  
  3. Make sure the ignition switch is OFF , then remove the right trunk side trim panel and unplug the control unit connector.
  4.  
  5. Installation by replacing the control unit and its mounting screws and connector.
  6.  

 
label.common.footer.alt.autozoneLogo