The brake proportioning valve is located on the passenger side of the vehicle, bolted to the fire wall or fender.
REMOVAL & INSTALLATION
- Locate the valve and disconnect the fluid lines from it. Plug the lines. There are six lines coming from the valve.
- Remove the mounting bolts and remove the valve.
The valve is replaced as an assembly, it can not be overhauled.
- Mount the valve in position and tighten the mounting bolts to 9 ft. lbs. (13 Nm).
- Reconnect the six brake lines to the valve. Tighten the line fittings to 14 ft. lbs. (19 Nm).