Honda Civic/CRX/del Sol 1984-1995 Repair Guide

Rear Main Seal

Print

REMOVAL & INSTALLATION



See Figure 1

The rear main oil seal is installed in a separate housing on the rear of the block. Replacement of the seal requires the removal of the transaxle, flywheel and clutch housing, as well as the oil pan. Refer to the appropriate sections for the removal and installation of the above components. Both the front and rear main seal are installed after the crankshaft has been tightened, in the event it was removed. Special drivers are used.



Click image to see an enlarged view

Fig. Fig. 1: Installing the rear main oil seal in the housing

 
label.common.footer.alt.autozoneLogo