Honda Civic/CRX/del Sol 1984-1995 Repair Guide

Muffler Assembly

Print

REMOVAL & INSTALLATION



  1. Raise the vehicle and support on jackstands.
  2.  
  3. Remove the U-bolt assembly and the rubber insulators from the hanger brackets and remove the muffler assembly. Slide the muffler assembly toward the rear of the car to disconnect it from the exhaust pipe.
  4.  
  5. Replace parts as needed.
  6.  
  7. Position the muffler assembly under the car and slide it forward onto the exhaust pipe. Check that the slot in the muffler and the tab on the exhaust pipe are fully engaged. Make sure that the gaskets are positioned properly. Tighten the muffler-to-exhaust pipe bolts to 16 ft. lbs. (22 Nm).
  8.  
  9. Install the rubber insulators on the hanger assemblies. Install the U-bolt and tighten
  10.  
  11. Check the system for leaks. Lower the vehicle.
  12.  

 
label.common.footer.alt.autozoneLogo