Honda Civic/CRX/del Sol 1984-1995 Repair Guide

Blower Motor Resistor

Print

REMOVAL & INSTALLATION



The blower resistor is located on the front of the blower housing.

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the glove box assembly, if required.
  4.  
  5. Disconnect the resistor wire connector.
  6.  
  7. Remove the resistor attaching screws.
  8.  
  9. Remove the blower motor resistor.
  10.  
  11. Installation is the reverse of removal.
  12.  
  13. Install the glove box if it was removed and connect the negative battery cable.
  14.  

 
label.common.footer.alt.autozoneLogo