Honda Civic/CRX/del Sol 1984-1995 Repair Guide

Interior Trim

Print

REMOVAL & INSTALLATION



See Figures 1 through 9

Removal of the interior trim panels is very simple if the time is taken to do it carefully. To remove any of the panels all that is needed is a phillips screwdriver and a trim removal tool.

Select the panel that you are going to remove and located all of the retaining screws. Many of the screws are hidden behind plastic covers, so keep this in mind when looking. Once all of the screws are located, remove any interfering pieces, such as the removable panels in the CRX or the Hatchback models. After removing the mounting screws, carefully pry the panel away from the body, releasing any retaining clips as needed. Be careful not to scratch or gouge the panels.

When installing the panels make sure that they are aligned properly on all sides before tightening the screws. When tightening the screws use an alternating pattern to tighten the panel evenly and prevent warpage.



Click image to see an enlarged view

Fig. Fig. 1: Interior trim panel removal-1984-87 sedan



Click image to see an enlarged view

Fig. Fig. 2: Interior trim panel removal-1984-87 hatchback



Click image to see an enlarged view

Fig. Fig. 3: Interior trim panel removal-1988-91 sedan



Click image to see an enlarged view

Fig. Fig. 4: Interior trim panel removal-1988-91 hatchback



Click image to see an enlarged view

Fig. Fig. 5: Interior trim panel removal-1988-91 CRX



Click image to see an enlarged view

Fig. Fig. 6: Interior trim panel removal-1992-95 hatchback



Click image to see an enlarged view

Fig. Fig. 7: Interior trim panel removal-1992-95 coupe



Click image to see an enlarged view

Fig. Fig. 8: Interior trim panel removal-1992-95 sedan



Click image to see an enlarged view

Fig. Fig. 9: Interior trim panel removal-del Sol

 
label.common.footer.alt.autozoneLogo