Honda Civic/CRX/del Sol 1984-1995 Repair Guide

Windshield Wiper Arms

Print

REMOVAL & INSTALLATION



See Figures 1, 2 and 3



Click image to see an enlarged view

Fig. Fig. 1: Exploded view of the wiper arm assembly

On models equipped with a rear wiper system, the removal of the wiper arm design is the same as for the front wiper arms.

  1. Lift the caps at the wiper arm pivots.
  2.  
  3. Remove the wiper arm retaining nuts.
  4.  
  5. Gently pry the arms from the pivots.
  6.  
  7. Install the arms in position, make sure that they are positioned correctly (not too low or too high). Tighten the retaining nuts to 10 ft. lbs. (14 Nm).
  8.  



Click image to see an enlarged view

Fig. Fig. 2: Unbolt the wiper arm using a wrench



Click image to see an enlarged view

Fig. Fig. 3: The aluminum arm is held on the steel splines of the pivot point by the retaining nut

 
label.common.footer.alt.autozoneLogo