Honda Civic/Del Sol 1996-2000

Sway Bar

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Sway bar-to-frame mounting bracket



Click image to see an enlarged view

Fig. View of the sway bar end link

  1. Matchmark the sway bar for proper reinstallation.
  2.  
  3. Disconnect the sway bar links from the end of the sway bar.
  4.  
  5. Remove the sway bar bushing brackets from the vehicle's underbody.
  6.  
  7. Remove the sway bar.
  8.  

To install:

  1. Installation is the reverse of removal, noting the following steps:
    1. Apply silicone grease between the sway bar bracket busing and sway bar.
    2.  
    3. Tighten the sway bar retainers, as follows:

      Sway bar bracket-to-body bolts: 16 ft. lbs. (22 Nm)
       
      Sway bar end link nut and bolt 14 ft. lbs. (19 Nm)
       

    4.  

  2.  

 
label.common.footer.alt.autozoneLogo