Honda Civic/Del Sol 1996-2000

Control Cables

Print

REMOVAL & INSTALLATION



Temperature Control Cable
  1. Locate the heater control valve under the hood and disconnect the temperature control cable from the heater control valve and arm.
  2.  
  3. Locate the air mix control arm and heater control cable under the dash and disconnect the cable.
  4.  
  5. Set the climate control temperature to MAX COOL with the ignition switched ON .
  6.  
  7. Reconnect the heater control cable to the air mix control arm assembly under the dash. Make sure the cable sheathing is flush against the stop.
  8.  
  9. Access the heater control valve under the hood and move the heater valve arm away from the firewall to the fully closed position.
  10.  
  11. Attach the cable end to the heater valve arm.
  12.  
  13. Hold the heater valve arm in the fully closed position while applying a light load toward the firewall on the cable sheathing to remove any slack in the cable.
  14.  
  15. Clamp the cable into the heater control valve.
  16.  
  17. Test the operation of the unit to make sure no binding occurs and repair as necessary.
  18.  

 
label.common.footer.alt.autozoneLogo