REMOVAL & INSTALLATION
Fig. View of the lower control arm-to-spindle assembly mounting bolt
Fig. After you have loosened the strut mounting bolt, pivot the lower arm down
Fig. Use a box end wrench to remove the lower control arm inner mounting bolt
Raise and safely support the vehicle.
Remove the rear tire/wheel assembly.
Remove the inner and outer bushing flanged through bolts.
Remove the stabilizer bar link flange nut.
Remove the lower arm.
Installation is the reverse of removal, noting the following steps:
Lubricate the outer arm bushing with silicone grease.
Tighten the stabilizer bar link flange nut to 22 ft lbs. (29 Nm)
Tighten the bushing through bolts to 40-43 ft. lbs. (54-59 Nm)
Tighten the lug nuts to 80 ft. lbs. (108 Nm)