REMOVAL & INSTALLATION
Fig. Remove the lower steering column cover
Fig. Remove the cover from beneath the steering column
Fig. View of the lower cover
Fig. Remove the upper steering column cover
The models covered by this guide are equipped with a Supplemental Restraint System (SRS), which uses an air bag. Whenever working near any of the SRS components, such as the impact sensors, the air bag module, steering column and instrument panel, disable the SRS.
Disable the air bag system.
Remove the driver's side lower dashboard cover and knee bolster.
Remove the steering column covers.
Disconnect the harness by gently depressing the tab on the connector and pulling.
Remove the combination switch mounting screws.
Remove the switch.
Installation is the reverse of the removal procedure.