Honda_Cr-V_2001-2006

Slave Cylinder

Print

Removal & Installation



  1. Locate the slave cylinder mounted on the transaxle assembly, near the radiator.
  2.  
  3. Remove the flare fitting and steel line from the slave cylinder assembly.

    Click image to see an enlarged view

    Fig. The clutch slave cylinder is mounted onto the transaxle housing, just behind the radiator



    Click image to see an enlarged view

    Fig. Disconnecting the hydraulic line from the slave cylinder

  4.  
  5. Remove the slave cylinder from the clutch housing by removing the attaching bolts.
  6.  
  7. Installation is the reverse of the removal procedure
    NOTE
    Use only fresh DOT 3 or 4 brake fluid from a sealed container to refill the clutch hydraulic system.

  8.  
  9. Fill, then bleed the clutch system, using a suitable DOT 3 or 4 brake fluid.
  10.  

 
label.common.footer.alt.autozoneLogo