Honda_Cr-V_2001-2006

Distributor

Print

Removal & Installation



2.0L Engine
  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Cruise control cable
     
    Air intake duct
     
    Distributor harness connector
     
    Spark plug wires
     
    Distributor

    Click image to see an enlarged view

    Fig. Exploded view of the distributor mounting-CR-V

     

  4.  

To install:

  1. Install or connect the following:

    Distributor. Use a new O-ring seal.
     
    Spark plug wires
     
    Distributor harness connector
     
    Air intake duct
     
    Cruise control cable
     
    Negative battery cable
     

  2.  
  3. Set the ignition timing and tighten the mounting bolts to 13 ft. lbs. (18 Nm).
  4.  

 
label.common.footer.alt.autozoneLogo