Honda_Cr-V_2001-2006

Ignition Coils

Print

Removal & Installation



2.4L Engine
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the ignition coil cover (A), ignition coil connectors (B) if necessary, then remove the ignition coils (C).

    Click image to see an enlarged view

    Fig. Remove the ignition coil cover (A) ,ignition coil connectors (B) then remove the ignition coils (C)-2006 model shown

  4.  

To install:

  1. Install the ignition coils. Tighten the retaining bolts to 8.7 ft. lbs. (12 Nm).
  2.  
  3. Attach the ignition coil connectors, if necessary.
  4.  
  5. Install the ignition coil cover and tighten the retainers to 7.2 ft. lbs. (9.8 Nm).
  6.  
  7. Connect the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo