Honda_Cr-V_2001-2006

Exhaust Manifold

Print

Removal & Installation



2.0L Engine
  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Exhaust manifold heat shield
     
    Heated Oxygen Sensor (HO 2 S) connector
     
    Exhaust front pipe
     
    Exhaust manifold bracket, if equipped
     
    Exhaust manifold
     

  4.  

To install:

  1. Install or connect the following:

    Exhaust manifold. Tighten the fasteners to 23 ft. lbs. (31 Nm).
     
    Exhaust manifold bracket, if equipped. Tighten the bolts to 33 ft. lbs. (44 Nm).
     
    Exhaust front pipe. Tighten the nuts to 40 ft. lbs. (55 Nm).
     
    Heated Oxygen Sensor (HO 2 S) connector
     
    Exhaust manifold heat shield
     
    Negative battery cable
     

  2.  

2.4L Engine
  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    VTEC solenoid valve
     
    Driveshaft heat shield
     
    Exhaust manifold heat shield
     
    Exhaust front pipe
     
    Exhaust manifold bracket, if equipped
     
    Exhaust manifold

    Click image to see an enlarged view

    Fig. Exhaust manifold and related parts

     

  4.  

To install:

  1. Install or connect the following:

    Exhaust manifold. Tighten the fasteners to 3 ft. lbs. (44m).
     
    Exhaust manifold bracket, if equipped. Tighten the bolts to 33 ft. lbs. (44 Nm).
     
    Exhaust front pipe. Tighten the nuts to 16t. lbs. (22m).
     
    Exhaust manifold heat shield
     
    Driveshaft heat shield
     
    VTEC solenoid valve
     
    Negative battery cable
     

  2.  

 
label.common.footer.alt.autozoneLogo