Honda_Cr-V_2001-2006

Upper Control Arm

Print

Bushing Replacement



The upper control arm bushings are serviced with the upper control arm as an assembly.

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Support the lower control arm assembly with a floor jack.
  4.  
  5. Remove or disconnect the following:

    Upper ball joint
     
    Inner control arm flange bolts.
     
    Upper control arm
     

  6.  

To install:


NOTE
Use new self-locking nuts for assembly.

  1. Install the upper control arm. Tighten the ball joint nut to 29-35 ft. lbs. (39-47 Nm) and the inner flange bolts to 40 ft. lbs. (54 Nm).
  2.  

 
label.common.footer.alt.autozoneLogo