Honda_Cr-V_2001-2006

Removal & Installation

Print

2.0L Engine



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Relieve the fuel system pressure.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Wire harness bracket
     
    Power steering hose bracket
     
    Fuel lines
     
    Fuel filter

    Click image to see an enlarged view

    Fig. Exploded view of the fuel filter mounting-2.0L

     

  6.  

To install:

  1. Install or connect the following:

    Fuel filter
     
    Fuel lines. Use new sealing washers.
     
    Power steering hose bracket
     
    Wire harness bracket
     
    Negative battery cable
     

  2.  
  3. Start the engine and check for leaks.
  4.  

2.4L Engine




NOTE
The fuel filter should be replaced whenever the fuel pressure drops below 48 psi, after making sure that the fuel pump and fuel pressure regulator are okay.

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Relieve the fuel system pressure.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Fuel pump
     
    Fuel filter carrier (A)
     
    Fuel filter

    Click image to see an enlarged view

    Fig. Exploded view of the fuel filter mounting-2.4L

     

  6.  

To install:

  1. Install or connect the following:

    Fuel filter
     
    Fuel lines
     
    New gasket (B)
     
    New o-rings (E)
     
    Connectors (C)
     
    Sending unit (D)
     

  2.  
  3. Start the engine and check for leaks.
  4.  

 
label.common.footer.alt.autozoneLogo