Honda_Cr-V_2001-2006

Fuel Pump

Print

Removal & Installation



2.0L Engine

CAUTION
The fuel injection system remains under pressure, even after the engine has been turned OFF. The fuel system pressure MUST BE relieved before disconnecting any fuel lines. Failure to do so may result in fire and/or personal injury.

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Relieve the fuel system pressure.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Left rear seat cushion
     
    Base frame cover
     
    Access panel
     
    Fuel pump module wiring connector
     
    Fuel supply and return lines
     
    Fuel pump module
     

  6.  

To install:

  1. Install or connect the following:

    Fuel pump module. Use a new seal and tighten the nuts to 52 inch lbs. (6 Nm).
     
    Fuel supply and return lines
     
    Fuel pump module wiring connector
     
    Access panel
     
    Base frame cover
     
    Left rear seat cushion
     
    Negative battery cable
     

  2.  
  3. Start the engine and check for leaks.
  4.  

2.4L Engine

CAUTION
The fuel injection system remains under pressure, even after the engine has been turned OFF. The fuel system pressure MUST BE relieved before disconnecting any fuel lines. Failure to do so may result in fire and/or personal injury.

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Relieve the fuel system pressure.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Fuel filler cap
     
    Access panel, under the rear seats
     
    Fuel pump connector
     
    Fuel supply and return lines
     
    Fuel pump locknut
     
    Fuel pump module
     

  6.  
  7. Installation is the reverse of removal.

    Click image to see an enlarged view

    Fig. Fuel module exploded view



    Click image to see an enlarged view

    Fig. Lockring installation

  8.  

 
label.common.footer.alt.autozoneLogo