Honda_Cr-V_2001-2006

Coil Spring

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the strut from the vehicle and install in a strut spring compressor. Compress the spring until the end of the spring comes away from the spring seat.
  4.  
  5. Remove or disconnect the following:

    Upper strut mount, spring seat and related components
     
    Coil spring from the strut spring compressor
     

  6.  

To install:


NOTE
Use a new self-locking nut.

  1. Compress the spring and position the strut so that the end of the spring aligns with the notch in the spring seat.
  2.  
  3. Install or connect the following:

    Upper strut mounting components and tighten the nut to 22 ft. lbs. (29 Nm).
     
    Strut to the vehicle
     

  4.  
  5. Check the wheel alignment and adjust as necessary.
  6.  

 
label.common.footer.alt.autozoneLogo