Honda_Cr-V_2001-2006

Lower Control Arm

Print

Removal & Installation



2001 Models
  1. Raise and safely support the vehicle.
  2.  
  3. Remove the rear tire/wheel assembly.
  4.  
  5. Remove the inner and outer bushing flanged through bolts.
  6.  
  7. Remove the stabilizer bar link flange nut.
  8.  
  9. Remove the lower arm.
  10.  

To install:

  1. Installation is the reverse of removal, noting the following steps:

    Lubricate the outer arm bushing with silicone grease.
     
    Tighten the stabilizer bar link flange nut to 22 ft lbs. (29 Nm)
     
    Tighten the bushing through bolts to 40 ft. lbs. (54 Nm)
     
    Tighten the lug nuts to 80 ft. lbs. (108 Nm)
     

  2.  

 
label.common.footer.alt.autozoneLogo