Honda_Element_2003-2006

Camshafts, Bearings, & Lifters

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section. Also see the IMA system disabling before proceeding with any procedure.
  2.  
  3. Remove or disconnect the following: Negative battery cableAccessory drive beltValve coverCamshaft sprocketRocker arms and shaft

    Negative battery cable
     
    Accessory drive belt
     
    Valve cover
     
    Camshaft sprocket
     
    Rocker arms and shaft
     

  4.  


NOTE
Keep all valvetrain components in order for assembly.

  1. Remove the camshaft holder bolts in reverse of the tightening sequence.
  2.  
  3. Remove the camshaft.
  4.  

To install:



Click image to see an enlarged view

Fig. Camshaft holder tightening sequence-Insight



Camshafts. Tighten the holder bolts in sequence to 105 inch lbs. (12 Nm).
 
Rocker arms and shaft
 
Camshaft sprocket
 
Valve cover
 
Accessory drive belt
 
Negative battery cable
 

  1. Adjust the valve clearance.
  2.  
  3. Start the engine and check for leaks.
  4.  

  1. Before servicing the vehicle, refer to the Precautions Section. Also see the IMA system disabling before proceeding with any procedure.
  2.  
  3. Remove or disconnect the following:
    NOTE
    Keep all valvetrain components in order for assembly.



    Negative battery cable
     
    Accessory drive belt
     
    Valve cover
     
    Camshaft sprocket
     
    Rocker arms and shaft
     

  4.  
  5. Remove the camshaft holder bolts in reverse of the tightening sequence.
  6.  
  7. Remove the camshaft.
  8.  

To install:

Click image to see an enlarged view

Fig. Camshaft holder tightening sequence-Insight



Camshafts. Tighten the holder bolts in sequence to 105 inch lbs. (12 Nm).
 
Rocker arms and shaft
 
Camshaft sprocket
 
Valve cover
 
Accessory drive belt
 
Negative battery cable
 

  1. Adjust the valve clearance.
  2.  
  3. Start the engine and check for leaks.
  4.  

 
label.common.footer.alt.autozoneLogo