Honda_Element_2003-2006

Water Pump

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section. Also see the IMA system disabling before proceeding with any procedure.
  2.  
  3. Drain the cooling system.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Accessory drive belt
     
    Water pump

    Click image to see an enlarged view

    Fig. Exploded view of the water pump mounting-Insight

     

  6.  

To install:

  1. Install or connect the following:

    Water pump. Use a new seal and tighten the bolts to 105 inch lbs. (12 Nm).
     
    Accessory drive belt
     
    Negative battery cable
     

  2.  
  3. Fill the cooling system.
  4.  
  5. Start the engine and check for leaks.
  6.  

 
label.common.footer.alt.autozoneLogo