Honda_Element_2003-2006

2006 Models

Print

  1. Before servicing the vehicle, refer to the Precautions Section. Also see the IMA system disabling before proceeding with any procedure.
  2.  
  3. Remove the PGM-FI (Fuel Pump) main relay from the multi relay box.
  4.  
  5. Start the engine and let it idle until it stalls.
  6.  
  7. Turn off the ignition.
  8.  
  9. Remove the fuel fill cap.
  10.  
  11. Disconnect the negative battery cable.
  12.  
  13. Remove the quick-connect fitting cover from fuel supply line.
  14.  
  15. Place a shop towel over the fitting to absorb leakage and disconnect the fitting.
  16.  
  17. When repairs are complete, replace the fitting.
  18.  
  19. Reconnect the negative battery cable and replace the PGM-FI main relay. Install the fuel filler cap.
  20.  
  21. Turn the ignition to the ON position and allow the fuel pressure to rise. Repeat two or three times and check for leaks.
  22.  

 
label.common.footer.alt.autozoneLogo