Honda Insight 2000-2006

2000-05 Models

Print

  1. Before servicing the vehicle, refer to the Precautions Section. Also see the IMA system disabling before proceeding with any procedure.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the fuel filler cap.
  6.  
  7. Hold the fuel rail inlet banjo bolt with a flare nut wrench.
  8.  
  9. Place a shop towel over the fitting to absorb leakage.
  10.  
  11. Loosen the service bolt 1 turn.
  12.  
  13. When repairs are complete, replace the sealing washers and tighten the service bolt to 16 ft. lbs. (22 Nm) on 2000-03 models, or 105 inch lbs. (12 Nm) on 2004-2005 models.
  14.  
  15. Install the fuel filler cap.
  16.  
  17. Connect the negative battery cable.
  18.  
  19. Start the engine and check for leaks.
  20.  

 
label.common.footer.alt.autozoneLogo